See how a sidewall conveyor belt moves bulk material from loading to steep lifting and discharge, and learn how corrugated sidewalls and cleats work.
READ MORE
QBF rubber is on site at a coal chemical plant, installing a corrugated sidewall conveyor belt as part of a retrofit. The belt it replaces had worn unevenly and run off-centre for most of its service life. The new specification was not picked from a catalogue. It came out of a survey of the conveyor that carries it.
Where the problem actually sat
Before a belt was quoted, QBF rubber engineers walked the line end to end. They looked at the material and how it behaves in the trough, at the belt path and the transitions, at skirt clearance. Idlers and pulleys were checked too, along with the shape they were in.
The picture that came back was consistent. The belt was worn, yes. It was also the wrong belt for the duty. A belt that does not match its line will run off-centre, and once it runs off-centre, wear concentrates in a few places and speeds up there. Correct the tracking alone and the wear comes back.
The new specification: B1400 S300 TC280, flame-retardant K3
The replacement belt is specified as B1400 S300 TC280, flame-retardant K3. The figures were set during the survey, not taken off a stock list, and they match the duty this line actually runs.
Width, wall height and base stiffness follow the material, the incline and the geometry of the conveyor. On this line they were set during the survey, then checked against the duty the belt actually runs.
Splices made on site, then commissioning
The belt is joined on site by hot vulcanization, not with mechanical fasteners. The splice is pressed and cured under heat on the line itself. On a sidewall belt the wall and cleats are cured with the splice, so the wall runs continuous through the joint instead of breaking at every connection.
Commissioning follows the splicing. Tracking is corrected, tension is set, and the belt is run before material goes on it.
Belt changes are shutdown work at a coal chemical plant. What this project is after is a line that tracks straight, wears evenly, and a next change that can be scheduled rather than forced.
READ MORE
Learn how corrugated sidewall conveyor belts use raised edges and cleats to move bulk materials on steep inclines, and what buyers should check before specifying one.
READ MORE
The show’s theme this year — “New Quality, No Borders, A Shared Future” — has become the common language of construction machinery worldwide.
A deeper change is gathering pace where mining meets building materials. It is not about size. It is about efficiency, about emissions, and about how much of the work a machine can do on its own.
24–27 November | bauma CHINA, Shanghai First edition under the new “one show, two venues” layout QBF rubber brings its complete mining conveying solutions Shanghai New International Expo Centre (SNIEC) · Booth E6.875 Customers from around the world are welcome to see what a more efficient, lower-energy conveying line looks like.
READ MORE
A deeper change is gathering pace where mining meets building materials. It is not about size. It is about efficiency, about emissions, and about how much of the work a machine can do on its own.
24–27 November | bauma CHINA, Shanghai First edition under the new “one show, two venues” layout QBF rubber brings its complete mining conveying solutions Shanghai New International Expo Centre (SNIEC) · Booth E6.875 Customers from around the world are welcome to see what a more efficient, lower-energy conveying line looks like.
See you in Nanning.
The 14th China-ASEAN Mining Cooperation Forum kicks off November 6–8 at the Nanning International Convention and Exhibition Center. We’re taking booth B052. MONSHTECH — the bulk-handling brand we run under QBF rubber — will have our core conveyor lineup on the stand.
Why this forum, why now. Southeast Asian miners keep coming back to Nanning because it’s the one event where Chinese conveyor builders, EPC houses and the operators themselves end up in the same room. So we’re not flying out just for banners. We want to talk through actual projects.
What we usually end up fixing on site.
Walk onto a mine and the same three problems show up.
Routes that snake across hills and ravines — trucking that ore gets expensive fast, and one rainy season wrecks the budget.
Vertical lifts. Open-pit benches and underground shafts don’t play nice with a flat belt; you need something that holds material on a 40–60° incline.
And dust. Coarse, abrasive rock leaking at every transfer point — environmental teams aren’t forgiving about that anymore.
Our product line answers those three directly.
Ropetrackand overland conveyors take the load off trucks across broken ground.
Sidewallconveyor belts, sandwich belts and internal pocket belts handle the lift.
Pipe conveyors and continuous ship loaders close the loop from concentrator to port, with far less spillage.
What’s on the stand at B052.
ROPE-TRACK sidewall conveyor belt. Pipe conveyor belt. Open-pit and underground steep-angle belts. Underground internal bucket lift. Concentrator steep-angle belts. Sandwich belts. Continuous ship-loader sidewall units. Stackers and reclaimers for mine and port yards.
We scope single machines, system integration, and full EPC. Front-end survey up front, then supply, install, commission — and we don’t disappear after handover. Maintenance and upgrades are part of the deal.
If you’ve got a layout on your laptop, a site brief on your phone, or just a rough tonnage and a lift number — come find us. The engineers on stand will run through it with you: tonnage, material size, lift angle, route profile, power budget. Most of the mines we chat with leave with a haulage option that costs less than the truck-plus-standard-belt default they walked in with.
Event quick facts
14th China-ASEAN Mining Cooperation Forum & Exhibition (co-located with Guangxi International Mining Exhibition 2026)
November 6–8, 2026
Nanning International Convention and Exhibition Center
Booth B052
MONSHTECH is the bulk material handling brand of QBF rubber. We build conveyor systems, engineered products, EPC delivery and lifecycle service for mines, ports and stockyards.
READ MORE
QBF rubber has shipped a new batch of custom cleated conveyor belts out of its plant this month. Built on hot-vulcanized construction, custom cleat design and special rubber compounds matched to each application, the belts are made for inclines where a flat belt loses its grip.
READ MORE