Sidewall Conveyor Belt Retrofit Enters Installation at Coal Chemical Plant

QBF rubber is on site at a coal chemical plant, installing a corrugated sidewall conveyor belt as part of a retrofit. The belt it replaces had worn unevenly and run off-centre for most of its service life. The new specification was not picked from a catalogue. It came out of a survey of the conveyor that carries it.

側壁コンベアベルトの設置

Where the problem actually sat

Before a belt was quoted, QBF rubber engineers walked the line end to end. They looked at the material and how it behaves in the trough, at the belt path and the transitions, at skirt clearance. Idlers and pulleys were checked too, along with the shape they were in.

The picture that came back was consistent. The belt was worn, yes. It was also the wrong belt for the duty. A belt that does not match its line will run off-centre, and once it runs off-centre, wear concentrates in a few places and speeds up there. Correct the tracking alone and the wear comes back.

Chemical corrugated sidewall conveyor belt

The new specification: B1400 S300 TC280, flame-retardant K3

The replacement belt is specified as B1400 S300 TC280, flame-retardant K3. The figures were set during the survey, not taken off a stock list, and they match the duty this line actually runs.

Width, wall height and base stiffness follow the material, the incline and the geometry of the conveyor. On this line they were set during the survey, then checked against the duty the belt actually runs.

 

QBFRUB~1

Splices made on site, then commissioning

The belt is joined on site by hot vulcanization, not with mechanical fasteners. The splice is pressed and cured under heat on the line itself. On a sidewall belt the wall and cleats are cured with the splice, so the wall runs continuous through the joint instead of breaking at every connection.

Commissioning follows the splicing. Tracking is corrected, tension is set, and the belt is run before material goes on it.

Belt changes are shutdown work at a coal chemical plant. What this project is after is a line that tracks straight, wears evenly, and a next change that can be scheduled rather than forced.

Sidewall Conveyor Belt hot vulcanization

タグ:
アバター 管理者

製品

スチールコードベースベルト

ベースベルト

標準ベルトとは異なり、当社のベースベルトは横方向の剛性を高めることでたわみ箇所での変形を防ぎつつ、縦方向の柔軟性を維持することでプーリー周りでのスムーズな動作を実現しています。国際規格(DIN/ISO/EN)に厳密に準拠して製造された当社のベースベルトは、過酷なバルク搬送用途において長期的な安定性と信頼性の高い性能を保証します。
サイドウォール

サイドウォール

この強化サイドウォールは、高品質のゴムコンパウンドと一体型の布地補強構造を採用し、屈曲疲労耐性を高め、波状亀裂を防止します。動的疲労試験で検証済みで、多様なゴム特性と複数の標準/カスタムサイズを提供し、複雑な作業条件下でも信頼性の高い長期性能を発揮します。
セラミックプーリーラギング

プーリーのラギング

高性能セラミックプーリーライニングは、ベルトの滑り、摩耗の速さ、材料の堆積、プーリーの寿命の短さといった問題を解決します。この冷間接着タイプは、工場での熱加硫処理なしで現場での取り付けが可能です。92%アルミナセラミックタイルとゴム裏地を組み合わせることで、鉱山、採石場、港湾でのばら積み貨物取り扱い用途において、湿潤状態や泥濘地でも優れた摩擦性能を発揮します。
ラバーウェアライニング 05

ゴム製耐摩耗ライニング

当社のゴム製耐摩耗ライニングは、産業機器の内部向けに設計された高靭性保護ゴム層です。優れた耐摩耗性、耐衝撃性、耐腐食性を備え、ミル、シュート、ホッパーを長期にわたる材料の摩耗から効果的に保護します。軽量で耐久性に優れ、完全にカスタマイズ可能なため、メンテナンスコストを削減し、騒音を低減します。鉱業、セメント、化学工業用途に最適です。
側壁コンベアベルト

側壁コンベアベルト

QBFラバーは、港湾、冶金、トンネル工事、発電所、化学、セメント、地下鉄など、様々な産業分野におけるバルク材搬送用の高品質な急勾配コンベヤベルトの設計・製造を専門としています。ヨーロッパの金型と規格を全面的に採用する唯一の中国メーカーとして、QBFラバーはベルトの選定、製造、設置、試運転、トラブルシューティングまで、包括的なソリューションを提供しています。
EPDM製高温対応側壁コンベヤベルト

EPDM製高温対応側壁コンベヤベルト

特注EPDM製高温側壁コンベヤベルトは、300℃の瞬間的な熱衝撃に耐えます。セメント、冶金、発電所における高温バルク材料の搬送に最適です。
お問い合わせ

お問い合わせ

    製品
    連絡先
    WhatsApp
    メール