Applied for permanent-elastic and high-strength contact bonding of rubber to rubber, rubber to fabric, fabric to fabric and rubber to metal as well as leather, polyurethane and other materials.  Primarily used for conveyor belt splices, repairs on conveyor belts, pulley linings and wear protection linings of technical rubber in open pit minings, underground mines, steel plants etc.

Application instruction

Please operate on site and with materials temperature above 10℃ and humidity less than 90%. Please apply and prepared with germanBond® M hardener

Store in a cool and dry place Avoid contact with skin before curing. If contact with these, please wash immediately with soap and plenty of running water. In order to avid effect the bonding adhesion strength, please strictly follow the operation process.

Technical data

Specification:germanBond 2KR
Packing:  Can 
Base:polychloroprene (CR) 
Spissitude:approx. 1.45 g/cm³
Hardener:germanBond M
Application : brush, spatula
Application quantity:approx. 250 g/m² per coat 
Flash-off time :approx. 10 min (at 20 °C)
Pot life:approx. 2 h (at 20 °C)
Shelf life: 24 months
Storage requirements dry, cool, in tightly closed buckets 
Packing units:germanBond® 2kR: 1.0 kg tin 
germanBondM Hardener: 40 g (has to be ordered separately)


Reliable quality : Strong bonds, the same level as hot vulcanization assembling
Easy operation : No need to use vulcanizing machine, the simple tools can be operated
High efficiency : Short operating time, reduce downtime and production loss
Safe and reliable : The products are flame retardant and can be used safely in underground
Cost-effective products : The price is lower than the same quality product and with long lasting